Every sensor you received has a unique ID number which has been pre-registered to your site. The number can be found on a QR code on the sensor cable close to the blue connector.
You can register a sensor from your Android or Apple smartphone using the Converge mobile app, or just using your phone camera.
You can download this from the Google Play and Apple App stores using these links:
- IOS: https://itunes.apple.com/gb/app/converge-sensors/id1457340144
- Android: https://play.google.com/store/apps/details?id=io.converge
Once you have the app installed, follow the next steps:
Step 1: Select "add a sensor" in the Converge app, or open your phone camera, and point the camera to the QR code on the sensor to install.
Step 2: You can now name this sensor. We would recommend something that makes it easier for you to locate on the site rather than our example below.
Step 3: Once you have named the sensor click register to complete the process.
Once the sensor has been registered you need to install it on the rebar. To install the sensor you need a cable-tie or a wire.
Use the cable-tie to fix the sensor cable to the rebar ensuring that the metallic section of the sensor does not touch any rebar or frame. The sensor should be placed ensuring that you can plug it in easily to a node, and that the node can be located in a safe place.