After registering and installing the sensor (See: Signal Sensor registration and installation), you will be able to collect measurements from it.
Step 1: Get close to the area where the sensor is installed with your phone/tablet. (Within 5 metres for best results)
Step 2: Make sure your Bluetooth and location is switched on, the Converge App is open, and you've accepted the apps permission requests. The app will pick up the sensors in range and will automatically start collecting data from the sensor with the best signal. It will continue to do this until all sensors in range have had their data collected and uploaded.
Once the app has connected to the sensor, collecting measurements will take around 10s per day of measurements. If you kill the app, turn off your phones screen or allow it to 'go to sleep' during collection, the app will save all previously collected measurements and save power by stopping collection.
When you reopen the app, it will begin collection from the last measurement saved on the phone. For the most recent measurements please wait until the progress bar reaches 100%.