After registering and installing the sensor (See: Signal Sensor registration and installation), you will be able to collect measurements from signal Sensors
Step 1: Go close to the area where the sensor was installed.
Step 2: Make sure Bluetooth is switched on, on your phone, the Converge App is open and you've accepted the apps permission requests. The app will pick up the sensors in range (Up to 10 m, up to 300mm depth), the app will automatically start collecting data from the sensor with the best bluetooth signal.
Collecting sensor measurements takes around one minute, per 24hrs of data. If you kill the app or turn off your phones screen, collection will stop, starting from the last measurement collected previously, when you next open the phone/app.
Please wait until all sensors collect 100% of measurements.